Vacuum pile driver RWQ721
Product introduction
Solemn declaration: The vacuum pile car is a new product, and Ludewei has obtained a number of patents. Without the written permission of Lu Dewei, any company and individuals make, promise to sell, sell, use in technology and appearance with this with this technology and appearance and appearance. The same or the same equipment of the car shall bear the corresponding legal liability.
Feature overview
Technical Parameters
model | RWQ721 | ||
Power conveying system | Dedicated chassis | ||
Vacuum | -54KPa | Driving speed | 10-30km/h |
Excavation depth | 2M/3.5M | Climbing | 30% |
Water absorption depth | 4.5M | Turning radius | 6500mm |
Material storage tank accumulation | 1.8m³ | Turning method | steering wheel |
Diameter | 102mm | Number of drivers | 1 |
High -pressure water system | Axis | 2 | |
Pump pressure | 25MPa | Wheelbase | 2810mm |
Pump flow | 21L/min | Wheelbudie | 前1610mm,back1540mm |
Water tank volume | 0.85m5 | Number of tires | 6 |
engine | Tire specifications | 6.5R16 | |
model | Yanmar 4tnv98t | Quality and size | |
type | Diesel engine, 4 -cylinder, National III | Quality | 5400KG |
rated power | 63.9kw/2500rpm | Total quality | 8000kg |
Fuel tank volume | 120L | Dimensions | 5400 × 2090 × 2825mm |
Optional configuration | Hydraulic cutting machine, hydraulic crushing pick, cab | ||
Friendly reminder: Due to the continuous improvement and upgrading of the product, the content listed in this table cannot be changed simultaneously with the actual product. Therefore, this table cannot be identified as an attachment to the purchase contract. If necessary, technical parameters must be stated in the purchase contract.